Edision HDMI Modulator single DVB-T Especificações

(MPEG-2 HD/MPEG-4 HD Encoding + DVB-T Modulating) SW Version: 1.07 HW version: 0.1 Web NMS version: 1.03 4 HDMI to DVB-T Enc

Space the distance between 2 rows of machine frames should be 1.2~1.5m and the distance against wall should be no less than 0.8m. Mach

 The area of the conduction between grounding wire and device’s frame should be no less than 25 mm2. Chapter 3 Operation 3.1 LCD Menus An overvie

3.2 Initial Status Switch on the device and after a few seconds’ initialization, it presents start-up pictures as below:  DVB-T: indicate t

3.3 General Settings for Main Menu Press “Lock” key on the front panel to enter the main menu. The LCD will display the following pages where user

“Video Format”: the HDMI MPEG2 HD encoding module supports both MPEG2 and H.264 formats. Move the triangle mark with LEFT/RIGHT keys to spe

“Parse Program” is for checking the quantity of input programs from the corresponding Tuner input. “Select Program A (or B)” is for sel

 Constellation There are three different constellations QPSK, 16QAM and 64QAM shown on the LCD window. When entering Constellation, user can

LCD display would show them, users just need press LEFT and RIGHT buttons to choose and press ENTER button to confirm.  RF Frequency The RF o

Output A: the ASI output programs are same as carrier output A. Output B: the ASI output programs are same as carrier output B. 4) IP Output Se

Directory CHAPTER 1 INTRODUCTION ...

NOTE: The MAC address is according to the factory setting, and it is unique. It can only be modified through special software. 6) Saving C

this submenu. Encoder Modulator SW 1.07 HW 0.1

Chapter 4 WEB NMS Operation User not only can use front buttons to set configuration, but also can control and set the configuration in compute

4.2 Operation When we confirm the login, it displays the WELCOME interface as Figure-2. Figure-2 Input 1 From the menu on le

Figure-3 For user to turn to refer detailed explanation of terms on this interface Click this button to

Figure-4 Select the carrier output channel for the multiplexed programs. If this item is selected, all the input programs will

one-time clicking. Time limitation to parse the input programs Click this button to trigger a dialog box as below, where to add the

Figure-5 Select the carrier output channel for the inserted NI

setting. As Figure-7, click “Update NIT” to update the NIT information. Figure-7 IP Output Click “IP Output” from the left menu, it wi

RF On – To decide whether to enable the selected RF (carrier A/B) output or not. Bandwidth –Bandwidth selecting. (The default bandwidth is 8M) Co

CHAPTER 6 APPLICATION ... 32 CHAPT

the device. By using “Factory Set” user can import the default factory configuration.

Click “Browse” to find the path of the device update file for this device then click “Update” to update the device. After updating the device, user

Change Password When user clicks “Password”, it will display the password screen as Figure-14. Here user can change the Username and Pa

“Load File” to load the backup file to the device. Figure-15 Browse Button

Chapter 5 Troubleshooting DIGITAL INNOVATIONS’s ISO9001 quality assurance system has been approved by CQC organization. For guarantee the pro

 Maintenance needed Chapter 6 Application Application Examples 1). Residences and Private Homes Video content DVB‐T/ISDB-T distribution 2) Outsi

5) Cinema AudioVideo contents DVBT/ISDB-T distribution 6) Company AudioVideo contents distribution

Chapter 7 Packing List NDS3542A Encoder Modulator 1PC User's Manual

APPENDIX Our encoder & modulator series are individual-module design, and the encoding modules include:  MPEG2 SD super encod

Chapter 1 Introduction 1.1 Product Overview 1.2 Key Features  MPEG2 HD/MPEG4 HD video encoding  Up to 1920*1080@50P/60P supported (MPEG4 HD)

 RF Frequency range 30Mhz~960Mhz  LCD display, Remote control and firmware  Web NMS management; Updates via web  Lowest cost per channel --- br

Power supply AC 100V~240V Dimensions 482*400*44mm Weight 4.5 kgs Operation temperature 0~45℃ 1.4 Schematic Overview 1.5 Principle Chart 1.6

program, the video bit-rate may exceed 10Mbps, even up to 15Mbps. However, the maximum possible bit-rate output for single DVB-T carrier is

④ Lock Indicators ⑤ Up and down, left and right button ⑥ Enter button: for confirm ⑦ Menu button: for back step ⑧ Lock button:

Chapter 2 Installation Guide This section is to explain the cautions the users must know in some case that possible injure may bring to users when